Rubber Moulding

Rubber material can be processed using different moulding methods. We employ compression moulding, transfer moulding, and injection moulding processes in making rubber parts.

Compression Moulding is one of the simplest and least expensive ways to produce moulded rubber parts. While it is not typically recommended for complex parts requiring tight tolerances or flawless finishes, it is very cost effective method for manufacturing lower volume items.

Typically the preheated rubber is placed into an open heated mould cavity. The mould is closed and pressure is applied forcing the material to thoroughly cover the mould cavity. Constant heat and pressure are maintained until the material cures.

Transfer Moulding is very similar to compression moulding except that the material is pushed or "transferred" into the cavity by a piston instead of being directly placed into the mould. The added control in this process allows it to produce more complex parts with tighter tolerances and more consistent surface appearance. On the downside, the tooling is typically more expensive and it tends to operate at slower speeds than compression or injection moulding.

Both compression and transfer moulding processes require the measuring of the material being placed in the mould. This is not the case with the dip moulding and injection moulding processes.

The injection Moulding process for rubber is nearly identical to our process described in our website with one main difference. The heat is typically higher and the curing time longer when using rubber materials.

Materials - Commonly moulded rubber materials include Silicone, EPDM, Nitrile (NBR), Neoprene®, Hypalon®, SBR, Viton®, and Natural Rubber. Please refer to our materials chart or consult your sales engineer for determining the best material to use in your application.

These materials are particularly effective in the finishing industry. Two features that make rubber outstanding for the masking process are:

  1. Capability to withstand high temperatures
  2. Reusability

Engineering and Prototypes - Our multiple years of design experience has given us an advantage and often we advise clients of the best options for their applications. Our engineers will advise on material, process, and design to ensure the outcome is the most economical and efficient product. Please call our sales engineers with any inquiries and we will get started on your project.

Equipment - Machines vary between the different rubber moulding processes. For example, when comparing compression and transfer moulding, the compression operations require a unit of the equipment to apply pressure whereas the transfer moulding process does not. Size of the end product can be factored in to the type of machines needed. Measuring instruments also factor in to the equipment features.

Our Specialty - We produce components capable of withstanding temperatures up to 600° F (316° C).

Benefits of Compression Moulding Benefits of Transfer Moulding Benefits of Rubber Injection Moulding